Seat Belt Specifications Tightening torque specification Name Nm Pound foot Pound-inch Upper seat belt mount bolt 38 28 - Lower seat belt mount mounting bolt 38 28 - Seat belt retractor mounting...
Description and principle of operation of seat belts Shown is the 4-door version WARNING: After any collision, inspect all components of the seat belt system, including the retractors, buckles, front seat belt buckle...
Diagnostics and testing of seat belts Inspection and verification 1. Check the validity of the customer's complaint by using the system. 2. Perform a visual inspection for obvious signs of mechanical and...
Front seat belt retractor mechanism Removal 4-door version, 5-door version and "Station wagon" 1. Disconnect the lower seat belt anchor element. 3-door version 2. Disconnect the lower seat belt anchor...
Rear seat belt retractor (3-/5-door) Removal 1. Raise the rear seat cushion. 2. Disconnect the lower seat belt anchor element. 3. Remove the retractor cover. 4. Remove the seat belt retractor mechanism...
Rear Seat Belt Retractor (4-Door) Removal 1. Raise the rear seat cushion. 2. Disconnect the lower seat belt anchor element. 3. Remove the retractor cover. 4. Remove the intermediate C-pillar trim...
Rear seat belt retractor mechanism (station wagon) Removal 1. Raise the rear seat cushion. 2. Disconnect the lower rear seat belt anchor from the floor panel. 3. Fold the rear seat back backwards. 4. CAUTION: Do not...
Central rear seat belt retractor mechanism Removal 1. Disconnect the lower center seat belt anchorage. 2. NOTE: The seat belt webbing retainer is supplied with new seat belts and is not unique to Focus vehicles....
Rear center seat belt retractor (4-door) Removal 1. Disconnect the lower center seat belt anchorage. 2. Remove the rear luggage rack. For additional information, refer to Section 501-05. 3. Remove the center...
Shoulder belt height adjustment mechanism Removal 4-door version, 5-door version and "Station wagon" 1. Disconnect the lower seat belt anchor element. 3-door version 2. Disconnect the lower seat belt anchor...
Seat belt buckle — removal and installation Removal 1. Raise the rear seat cushion. 2. Remove the seat belt buckle. Installation 1. To install, perform the removal procedure in reverse order.
Auxiliary Restraint System Specifications Using a special tool Name Simulator Test and Deployment Wire (part of item "Test and Deployment Wire, Airbag/Pyrotechnic Seat Belt Pretensioner [418-S055]") Driver...
Disposal of a deployed airbag WARNING: After an air bag deploys, traces of sodium hydroxide, a combustion product that is irritating to the skin, may remain on the air bag surface. Wear protective...
Airbag disposal — unserviceable vehicle 1. WARNING: To minimize the risk of injury if the air bag deploys prematurely, always carry the active air bag module with the air bag and trim cover facing away from...
Disposal of an undeployed airbag Special tool Airbag/Pyrotechnic Seat Belt Tensioner Test and Deployment/Activation Wire 418-S055 (40-007A) General equipment: Battery, 12 V. All cars WARNING: To...
Disposal of airbags and seat belt tensioners Special tool Airbag/Pyrotechnic Seat Belt Tensioner Test/Initiation Wire 418-S055 (40-007A) General equipment: Battery, 12V Wooden blocks All cars WARNING: To minimize...
Shock sensor — removal and installation Removal WARNING: To prevent the risk of accidental deployment, the air bag control module backup power source must be discharged. After disconnecting the battery ground...
Side Impact Sensor — Removal and Installation Removal WARNING: To avoid the risk of accidental deployment, the air bag control module backup power must be discharged. Wait at least one minute after disconnecting the...
Driver Airbag Module — Removal and Installation Removal WARNING: To avoid the risk of accidental deployment, the air bag control module backup power must be discharged. Wait at least one minute after disconnecting the...
Passenger airbag module (vehicles up to 10.2001) Removal WARNING: To prevent the risk of accidental deployment, the air bag control module backup power must be discharged. Wait at least one minute after disconnecting...
Passenger airbag module (vehicles after 08.2002) Removal WARNING: To prevent the risk of accidental deployment, the air bag control module backup power must be discharged. Wait at least one minute after disconnecting...
Side airbag module Removal WARNING: Always wear safety glasses when working on a vehicle equipped with an air bag or when working with the air bag module. Failure to follow this...
Clock spring — removal and installation Removal WARNING: To prevent the risk of accidental deployment, the air bag control module backup power source must be discharged. After disconnecting the battery ground...
Restraint Control Module (RCM) Removal WARNING: To prevent the risk of accidental deployment, the Supplemental Restraint Control Module (RCM) backup power must be discharged. Wait at least one minute...