Car windscreen wipers and washers Ford Focus 2
Windshield wiper blade replacement
No tools are required to replace the wiper blades. 1. Move the wiper arm away from the glass, overcoming the force of the arm spring… 2. …turn the brush perpendicular to...
No tools are required to replace the wiper blades. 1. Move the wiper arm away from the glass, overcoming the force of the arm spring… 2. …turn the brush perpendicular to...
Replacing windshield wiper arms
You will need a 15 mm wrench. 1. Open the hood and place it on the support. 2. Remove the protective cap of the nut securing the lever to the wiper linkage shaft. 3....
You will need a 15 mm wrench. 1. Open the hood and place it on the support. 2. Remove the protective cap of the nut securing the lever to the wiper linkage shaft. 3....
Removal and installation of windshield wiper linkage assembly with gear motor
You will need a 10mm socket head. 1. Remove the windshield wiper arms ( see "Replacing the Windshield Wiper Arms" ). NOTE: The wiper arms can be removed together with...
You will need a 10mm socket head. 1. Remove the windshield wiper arms ( see "Replacing the Windshield Wiper Arms" ). NOTE: The wiper arms can be removed together with...
Replacing the rear window wiper blade
No tools are required to replace the wiper blade. 1. Move the windshield wiper arm away from the glass, overcoming the force of the arm spring, and remove the wiper arm...
No tools are required to replace the wiper blade. 1. Move the windshield wiper arm away from the glass, overcoming the force of the arm spring, and remove the wiper arm...
Replacing the rear window wiper arm
You will need a 13 mm wrench. 1. Remove the protective cap from the nut securing the lever to the wiper motor shaft. 2. Unscrew the nut… 3. …and remove the lever from...
You will need a 13 mm wrench. 1. Remove the protective cap from the nut securing the lever to the wiper motor shaft. 2. Unscrew the nut… 3. …and remove the lever from...
Windscreen wiper motor gearbox replacement
You will need: 13 mm keys and TORX T30. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the gear motor assembly with the wiper trapezoid (...
You will need: 13 mm keys and TORX T30. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the gear motor assembly with the wiper trapezoid (...
Replacement of the rear window wiper motor
You will need: a 13 mm wrench and an 8 mm socket head. 1. Disconnect the wire from the negative terminal of the battery. 2. Lift the protective cap… 3. …unscrew the...
You will need: a 13 mm wrench and an 8 mm socket head. 1. Disconnect the wire from the negative terminal of the battery. 2. Lift the protective cap… 3. …unscrew the...
Removing and installing the windshield washer
You will need: a 10 mm socket head and a flat-blade screwdriver. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the decorative trim of the...
You will need: a 10 mm socket head and a flat-blade screwdriver. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the decorative trim of the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See other similar sections for Ford cars:
• Electrical equipment: Windshield wipers and washers Ford Mondeo 1 (1993-1996)
• Electrical equipment: Windshield wipers and washers Ford Scorpio 2 (1994-1998)
• Electrical equipment: Windshield wipers and washers Ford Mondeo 1 (1993-1996)
• Electrical equipment: Windshield wipers and washers Ford Scorpio 2 (1994-1998)
Focus 2
Focus Turnier 1
Focus 1
- General information
- Vehicle device
- Owner's manual
- Faults en route
- Maintenance
- First maintenance
- Second maintenance
- Applications
- Consumables and spare parts
- Auto mechanic tips
- Power unit
- Engine repair
- Engine seal parts
- Cooling system
- Exhaust system
- Supply system
- Clutch
- Car gearbox
- Front wheel drives
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body and coating
- Body elements
- Side doors
- Tailgate
- Salon elements
- Safety system
- Windshield wipers and washers
- Body Care
- Electrical equipment
- Instruments and motors
- Battery and alternator
- Egnition lock
- Engine management
- Headlights and lighting
- Switches and sensors
- Schematic diagrams
Focus Turnier 1
- General information
- Introduction to guide
- Car care
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Fuel injection (gasoline)
- Fuel injection (diesel)
- Ignition system
- Power and exhaust system
- Transmission
- Clutch and drive shafts
- Mechanical gearbox
- Automatic gearbox
- Chassis
- Car suspension
- Steering
- Wheels and tires
- Brake system
- Body
- Exterior
- Interior
- Heating and ventilation
- Electrical equipment
- Equipment and devices
- Lighting and signaling
- Power devices
- Electrical circuits
Focus 1
- General information
- Using the manual
- Identification codes
- Power unit
- Engine
- Engine 1.4/1.6 Zetec-SE
- Engine 1.6/1.8/2.0 Zetec-E
- Engine Duratec ST 2.0 l
- Engine Duratec 8V 1.6 l
- Diesel engine 1.8 l
- Engine cooling
- Fuel supply
- Accessory drive
- Launch system
- Ignition system
- Air and vapor
- Engine management
- Exhaust toxicity
- Exhaust system
- Automatic gearbox
- Clutch
- Mechanical gearbox iB5
- Mechanical gearbox MTX-75
- Mechanical gearbox MT285
- Chassis
- Front suspension
- Rear suspension
- Wheels and tires
- Front axle axles
- Brake system
- Hydraulic brake
- Anti-lock braking system
- Steering
- Body and coating
- Body panels
- Body elements
- Salon elements
- Glass, frames and mechanisms
- Windshield wipers and washers
- Car sunroof
- Seat belts
- Body repairs
- Back elements
- Electrical equipment
- Climate control
- Heating and ventilation
- Instruments and control lamps
- Battery and alternator
- Audio system
- Headlights and lighting
- Power distribution
- Electronic Function Group