Car anti-lock braking system Ford Focus 1

Anti-Lock Specifications
Torque specification Name Nm Pound-foot Pound inch Wheel sensor bolts 9 - 80 Nuts of fastening of the brake pipeline to the main cylinder (M10) 17 13 - Connecting the...

Description and principle of operation of the anti-lock braking system
WARNING: Brake fluid contains polyglycerol esters and polyglycerol. Avoid contact with eyes. Wash your hands thoroughly after handling brake fluid. If brake fluid gets...

Diagnostics and checks of the anti-lock system
Refer to Electrical Wiring Diagram 206-09A for connection and connector information. Inspection and verification 1. Check the customer's complaint. 2. Visually inspect...

Hydraulic Control Unit (HCU)
Withdrawal All cars 1. WARNING: If brake fluid comes into contact with the paintwork, the affected area must be washed immediately with cold water. Disconnect the...

Rear wheel speed sensor
Withdrawal 1. Loosen wheel nuts. 2. Raise and support the vehicle. See Section 100-02 for more information. 3. Remove the wheel. 4. Remove the wheel sensor. 5....

Rear Wheel Speed Sensor Pulse Ring
Withdrawal Vehicles with rear wheel disc brakes 1. Remove the rear wheel hub. See Section 204-02 for more information. Cars with rear wheel drum brakes 2. Remove the...

Description and principle of operation of the directional stability function
Torque specification Name Nm lb-ft lb-in Wheel sensor bolts 9 - 80 Nuts of fastening of brake pipelines to the main cylinder (M10) 17 13 - Fastening the brake pipeline...

The speed sensor of the angular rotation of the car around the vertical axis
Withdrawal 1. Remove the right front seat. See Section 501-10 for more information. 2. Remove the panel of finishing of an overlay of a threshold of a door. See Section...

Acceleration sensor — removal and installation
Withdrawal 1. Remove the right front seat. See Section 501-10 for more information. 2. Remove the panel of finishing of an overlay of a threshold of a door. See Section...