Mounting the air filter cover on an engine with a carburetor
 |  |
Nut of fastening of a hose of ventilation on engines DOHC
Removing the air filter cover on DOHC engines
Mounting the air filter cover on an engine with a fuel injection system
 |  |
Attention! It is strictly forbidden to blow out the air filter with compressed air to reuse it.
1. On an engine with a carburetor, disconnect the side clamps, unscrew the four screws, remove the air filter cover and remove the air filter, then wipe the filter housing thoroughly.
2. On fuel injection and turbocharged diesel engines, disconnect the air pipe and retaining clips, unscrew the cover to the side and remove the air filter, then wipe the filter housing thoroughly.
3. On a DOHC engine, disconnect the wire from the idle air valve, unscrew the fastening nut and remove the crankcase ventilation hose, disconnect the retaining clips, remove the cover and remove the filter element.
4. On a diesel engine, unscrew the four nuts securing the air filter cover, remove the cover and remove the filter element.
Visitor comments