Car body wash and treatment Car body wash In most populated areas it is prohibited to wash a car in open areas, except in specially designated areas where dirty water is drained. wash a dirty car...
Elements of the bonnet and front part of the body Bonnet opening elements 1 – lock with a pawl, 2 – adjusting plate, 3 – hood opening cable, 4 – lower steering column cover, 5 – hood opening lever, 6 – ignition switch...
Hood cable — removal and installation Removal 1. Open the hood and lock it in the open position. 2. Remove the lower steering column cover after unscrewing 3 screws. 3. Unscrew the bracket mounting bolt and...
Hood adjustments Hood lock 1 – hood pin lock nut, 2 – hood lock pin The hood is hung on two hinges along the rear edge. The enlarged holes in the brackets for fastening the hinges on the...
Interior door trim — removal and installation Fastenings in the front part of the engine compartment 1 – lock, 2 – inner handle, 3 – glass guide fastening rivets, 4 – window lift mechanism fastening Removal 1....
Interior Door Handle — Removal and Installation Removal 1. Remove the inner door trim. 2. Carefully remove the sealing film around the door handle and rods. 3. Unscrew the two screws (13) (see Fig. Door closing...
Door Lock Cylinder — Removal and Installation Lock cylinder mounting 1 – lock cylinder, 2 – mounting bracket Removal 1. Remove the inner door trim and the sealing film above the lock cylinder. 2. Remove the mounting...
Door lock — removal and installation Removal 1. Remove the door trim, sealing film and inner door handle. 2. Unscrew the glass guide mounting screw and pull the guide down through the door frame window. 3....
Front seat — removal and installation Front seat mount (rear mount) The arrows indicate the rear mounting locations Front seat mount (front mount) The arrows indicate the front mounting locations Removal 1....