Front seat mount (rear mount)
The arrows indicate the rear attachment points
Front seat mount (front mount)
The arrows indicate the front attachment points
Withdrawal
1. Move the seat forward as far as it will go.
2. Unscrew the seat-to-floor bolts at the rear of the slide: 2 bolts on the inside and 1 bolt on the outside.
3. Move the seat back and unscrew one bolt on both sides of the slide.
4. Remove the seat from the car.
Installation
1. Install the seat in the car so that the front holes of the slide are aligned with the holes in the floor.
2. Screw in the bolts and finally tighten first the inner and then the outer bolt.
3. Move the seat forward, screw in the bolts and finally tighten first the inner and then the outer bolts.
Visitor comments