Interior (internal body elements) Ford Scorpio 1

Removal and installation of an upholstery of a ceiling
Screws for ceiling handles, seat belt anchors and sun visors 1. Open all doors, sunroof and hood. 2. Remove ground wire from battery. 3. Remove the seal from the upper...

Removal and installation of an internal rear-view mirror
1. Remove the mirror from the windshield by sawing through the adhesive layer under the base of the mirror with nylon thread. 2. Wipe the base of the mirror and the...

Removal and installation of the instrument panel
The location of the screws for fastening the instrument panel and individual panel assemblies 1 - left ventilation panel, 2 - instrument cluster trim, 3 - instrument...

Removal and installation of the center console
Vehicles manufactured before 04.1992 1. Remove ground wire from battery. Attention! At the same time, information in electronic storage devices is erased from memory....

Removal and installation of the upper console
1. Remove ground wire from battery. Attention! At the same time, information in electronic storage devices is erased from memory. 2. Remove the interior light by...

Removal and installation of the rear shelf (Salon models)
Latches of decorative panels of a back seat 1 - decorative rear belt holder, 2 - stand, 3 - seat latch, 4 - seat loop latch, 5 - lower mounting shanks, 6 - upper...

Removing and installing the front seat
1. Slide the seat all the way back, then unscrew the two bolts securing the front of the seat (one of the bolts is indicated by an arrow). 2. Disconnect the auxiliary...

Removal and installation of seat belts of forward seats
1. Remove the decorative cover from the upper belt anchor. On an adjustable mount, the cover is removed by opening the escutcheon and unscrewing the two screws. 2....

Removal and installation of seat belts of a back seat
Rear seat belts 1. Tilt the rear seat cushion forward. 2. Slide the buckle guide through the slot in the mat. Unscrew the buckle fastening bolt and remove the buckles....

Removal and installation of the rear seat
Pillow 1. Tilt the seat cushion forward and unscrew the hinge fastening screws. 2. Remove hinges (arrow), by unscrewing them from the body. 3. When installing, tighten...