Car rear suspension Ford Fusion

Features of the rear suspension design
The rear suspension (Fig. 7.2) is semi-independent, lever-spring with longitudinal levers, pivotally attached to the car body and connected to each other by a U-shaped...

Possible faults of the rear suspension
Possible malfunctions of the rear suspension, their causes and methods of elimination

Replacing the rear shock absorber
You will need: keys "13", "15", "18", socket head "8". Warning! Before raising the rear of the car, engage 1st gear and place chocks under the front wheels. After...

Replacing the rear suspension spring
Replace the spring if it is mechanically damaged or has significantly settled. Signs of settlement: deterioration of ride smoothness, frequent suspension breakdowns;...

Replacing the silent blocks of the rear suspension arms
With a certain amount of skill, silent blocks can be replaced directly on the car by unscrewing the bolts that secure the beam brackets to the body and removing the...

Replacing the rear hub bearing
You will need: a snap ring plier, a hammer, and a mandrel of a suitable diameter. 1. Remove the brake drum (see " Removal and installation the brake drum "). 2....

Replacing the rear suspension beam
It is more convenient to remove the rear suspension beam on a lift. If it is not possible to install the car on a lift, lift the rear of the car by installing a jack...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Fusion
Scorpio 1
Scorpio 2
Sierra