Car front suspension Ford Scorpio 1

Front suspension specifications
The front suspension is independent, Mac Pherson type. It consists of two suspension struts, two lower transverse arms and a transverse stabilizer, the ends of which...

Description of the front suspension design
Front suspension Front suspension parts 1 – shock absorber strut, 2 – suspension spring, 3 – upper cup, 4 – support element, 5 – shock absorber rod mounting nut, 6 –...

Front suspension beam — removal and installation
Removal 1. Loosen the wheel nuts on the corresponding side of the vehicle. 2. Raise and support the front of the vehicle and remove the front wheels. 3. Using a jack,...

Removal and installation the front suspension strut
1. Loosen the wheel nuts on the corresponding side of the vehicle. 2. Raise and support the front of the vehicle and remove the front wheels. 3. Using a jack, support...

Disassembly and assembly of suspension strut
Disassembly 1. Remove the suspension strut. 2. Clamp the lower part of the suspension strut in a vice. 3. Install spring compressor tool 14.021 and compress the...

Removal and installation the stabilizer
Removal 1. Remove the clamps and unscrew the 4 bolts securing the stabilizer to the body. 2. Raise the front of the car and unscrew the nuts securing the stabilizer to...

Replacing the metal-rubber bushing of the lever
1. Remove the suspension arm. 2. Unscrew the nut of the bolt securing the lever to the engine mount crossmember. 3. Remove the cotter pin and unscrew the castellated nut...

Removal and installation the steering knuckle
Wheel swivel mount 1 – shock absorber mounting bolt, 2 – steering rod mounting nut, 3 – stabilizer mounting nut Installing tool 14.026 when removing the shock absorber...

Checking the installation of the front wheels
1. Check the tire pressure and the condition of the tire treads on all wheels. 2. Check the condition of the wheel rims. 3. Check for play in the hinge joints of the...

Replacing wheel hub bearings
Front wheel hub in section 1 – protective cap, 2 – steering knuckle, 3 – tapered bearings, 4 – sealing ring 1. Remove the wheel knuckle (see subsection 10.1.2.6 ). 2....

Designation of tires and wheel rims
Designations on the sidewall of tires 1 – maximum load, 2 – inflation pressure, 3 – breaker characteristics, 4 – cord characteristics, 5 – material and number of cord...