Electrical equipment and appliances Ford Fusion

Features of the design of electrical equipment
On the car, DC electrical equipment with a rated voltage of 12 V is used. The electrical equipment of the car is made according to a single-wire circuit: the negative...

Diagnostics of malfunctions of onboard electrical equipment
A typical electrical circuit may include a main electrical element, various switches, relays, electric motors, fuses, fuses or circuit breakers related to this element,...

Location and replacement of fuses, fuses and relays
Most vehicle electrical power circuits are protected by fuses. Headlights, fan motors, fuel pump and other powerful consumers are connected via relays. Fuses and relays...

Replacing the windshield wiper gearmotor
You will need: key «on 10», flat blade screwdriver. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the gearmotor assembly with the wiper trapezoid...

Replacing the tailgate window wiper motor
You will need: keys «for 8», «at 13». 1. Disconnect the wire from the terminal «minus» battery. 2. Lift the protective cap.. 3.... unscrew the fastening nut.. 4.... and...

Removal and installation of a washer glass of a wind window
You will need a key «on 10». 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the left front fender liner (see « Removal and installation of wheel...

Replacing the front door power window motor
You will need a TORX T30 key. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the door upholstery (see « Removal and installation of an upholstery of...

Electric motor of the radiator fan of the cooling system
You will need a socket «on 10». 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the electric fan of the engine cooling system assembly with the...

Removal and installation of the heater electric fan
You will need a key «for 8». 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the dashboard (see « Removal and installation of the instrument panel...

Heater recirculation damper motor
You will need a TORX T25 key. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the dashboard (see « Removal and installation of the instrument panel...

Replacement of additional resistance of the heater electric fan
You will need a TORX T25 key. 1. Disconnect the wire from the terminal «minus» battery. 2. To gain access to additional resistance, open the glove box.. 3.... pressing...

Electric heating of glass of a door of a back
The tailgate glass heating element consists of horizontal conductive strips connected on both sides by vertical busbars. One bus connected to «+» on-board electrical...

Design features of the instrument cluster
All control and measuring devices of the car are united in a combination of devices. It includes a speedometer, tachometer, total and daily mileage counter (odometer),...

Removal and installation of a combination of devices
You will need: TORX T25 wrench, flat and Phillips screwdrivers. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the airbag slip ring (see « Removal...

Removing and installing speakers of the acoustic system
The car has four sound system speakers: one speaker each in the front and rear doors. You will need a TORX T20 wrench to remove the speakers. 1. Disconnect the wire from...

Removal and installation of the car radio
Attention! Ford Fusion cars are equipped with car radios that have a security code. As a rule, during the pre-delivery preparation, the Ford dealer already enters the...

Removing and installing the antenna
The antenna is mounted on the roof of the car in front in the center. You will need a TORX T25 key. 1. To remove the antenna, unscrew it from the bracket by turning it...

Removal and installation of the remote control of the audio system
Depending on the configuration, remote control panels of various types can be installed on Ford Fusion cars. You will need a flat blade screwdriver. 1. Disconnect the...

Removal and installation of the cigarette lighter cartridge
You will need a flat blade screwdriver. 1. Disconnect the wire from the terminal «minus» battery. 2. Using a screwdriver, pry up the floor tunnel lining.. 3.......

Electronic anti-theft remote control system
Ford Fusion vehicles are equipped with an electronic anti-theft remote control system, which includes the following functions: remote blocking (unlocking) door locks...

Control of the electronic anti-theft system
Locking door locks and arming from the remote control . To lock all vehicle doors, press button 2 (pic. 10.4) on the control panel. The door locks will be locked, the...

Replacing the battery in the remote control
1. Press the lock with a screwdriver.. 2.... and separate the remote control unit and the key holder. 3. Press the lock with a screwdriver.. 4....and separate the remote...

Removal and installation of the electronic anti-theft system control unit
You will need a Phillips screwdriver. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the instrument panel trim (see « Removal and installation of...

Design features of the immobilizer
An immobilizer is installed on Ford Fusion cars. This electronic device is designed to prevent unauthorized starting of the engine by breaking the electrical circuits of...

Additional functions of the immobilizer
Delay control for turning off the interior lighting. This function allows you to provide interior lighting for some time after the car doors are closed, which makes it...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Fusion
Scorpio 1
Scorpio 2
Sierra

FordBook.ru © 2014-2024 • Mobile version • Interesting to read • Sitemap: EN BG BY UA RS HR RO PL SK HU • Site search • Contact with administration
Focus 1 • Focus Turnier 1 • Focus 2 • Mondeo 1 • Mondeo 1 and 2 • Mondeo 2 • Mondeo 3 • Mondeo 4 • Escort 3 • Escort 4 • Escort 5 • Fiesta 2 • Fiesta 4 • Taurus 1 and 2 • Fusion • Scorpio 1 • Scorpio 2 • Sierra •