Car steering Ford Scorpio 1

Technical characteristics of the steering system
Description of the design The steering system has a rack and pinion steering transmission. The safety steering column has a two-piece steering wheel shaft with a...

Removal and installation the steering gear
Steering Removal 1. Set the steering wheel to the straight ahead position. 2. Unscrew the bolt of the elastic joint flange clamping collar and disconnect the steering...

Disassembly and assembly of the steering gear
Steering gear Disassembly 1. Disconnect the ball joint ends from the steering rods after loosening the lock nuts. 2. Remove the clamps securing the casings and move...

Removal and installation the steering wheel
Models before April 1992 1. Remove the ground wire from the battery. 2. Remove the horn button from the center of the steering wheel using a lever. 3. Unscrew the three...

Steering wheel centering
This action is used to correct small errors (up to 60°) in the steering wheel alignment. To correct large errors, remove the steering wheel and adjust the steering wheel...

Removal and installation the steering column lock
1. Remove the steering gear. 2. Insert the key into the lock and set it to position I. 3. Press the lock release button (indicated by the arrow) with a small screwdriver...

Removal and installation the steering column
Steering column Steering wheel height adjustment bracket mounting bolts The mounting bolts are indicated by arrows. Removal 1. Set the vehicle wheels to the forward...

Disassembly and assembly of the steering shaft
Steering column height adjuster Disassembly 1. Remove the synthetic material cover from the steering wheel hub. 2. Unscrew the steering wheel mounting nut. 3. Insert the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Fusion
Scorpio 1
Scorpio 2
Sierra