Exhaust system and evaporative emission Ford Fusion

Design features of the exhaust system
Exhaust gases are discharged from the engine through the exhaust manifold, combined with the exhaust gas neutralizer (catalytic collector), additional and main mufflers...

Replacing the exhaust system suspension cushions
The rubber mounts of the exhaust system suspension are replaced if, due to damage or excessive deformation, the system elements begin to knock when in contact with the...

Removal and installation the catalytic converter
You will need: a socket head "8", "10", "15", keys "13", "22". 1. Place the vehicle on an inspection pit or lift. 2. Disconnect the wire from the negative terminal of...

Replacing the main and additional mufflers
You will need: socket heads "10", "15". 1. Place the vehicle on an inspection pit or lift. 2. Unscrew the two nuts securing the intake pipe flange to the exhaust...

Removal and installation of thermal screens
During engine operation, the exhaust system heats up to a high temperature. Therefore, in case of severe mechanical damage or significant corrosion of the heat shields,...

Features of the fuel vapor recovery system
The fuel vapor recovery system prevents fuel vapors from escaping from the fuel system into the atmosphere, which have an adverse effect on the environment. The system...

Replacing the fuel vapor recovery system canister
The fuel vapor recovery system canister is removed for inspection or replacement if a persistent gasoline smell appears due to a leak in the canister or if the canister...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Fusion
Scorpio 1
Scorpio 2
Sierra