Car front suspension Ford Sierra

Front suspension specifications
Front suspension The front suspension is independent, Mac Pherson type. It consists of two suspension struts, two lower transverse arms and a transverse stabilizer, the...

Removal and installation the front suspension strut
Front suspension 1 – upper suspension strut mount, 2 – support bearing, 3 – suspension spring, 4 – shock absorber, 5 – steering knuckle, 6 – arm with ball joint, 7 –...

Disassembly and assembly of suspension strut
Disassembly 1. Remove the suspension strut. 2. Clamp the lower part of the suspension strut in a vice. 3. Install spring compressor tool 14.021 and compress the...

Removal and installation the stabilizer
Removal 1. Remove the clamps and unscrew the 4 bolts securing the stabilizer to the body. 2. Unscrew the nuts securing the stabilizer to the lower wishbones, remove the...

Replacing the metal-rubber bushing of the lever
1. Remove the suspension arm by unscrewing the nut of the bolt securing the arm to the engine suspension crossmember. 2. Remove the cotter pin and unscrew the...

Removal and installation the steering knuckle
Wheel swivel mount 1 – lower shock absorber mounting bolt, 2 – steering rod mounting nut, 3 – stabilizer mounting nut Removal 1. Loosen the front wheel nuts on the...

Checking the installation of the front wheels
Setting the convergence 1. Check the tire pressure and the condition of the tire treads on all wheels. 2. Check the condition of the wheel rims. 3. Check for play in the...

Replacing the front wheel hub bearings
Front wheel hub in section 1 – tapered bearings, 2 – sealing ring 1. Remove the wheel knuckle (see the corresponding description in subsection 9.1.6 ). 2. Screw the nuts...