Car clutch repair Ford Fusion

Clutch design features
Ford Fusion vehicles equipped with a manual transmission are equipped with a dry single-plate clutch with a central diaphragm spring (Fig. 6.1). The pressure plate is...

Possible clutch malfunctions, their causes and solutions
Possible clutch malfunctions, their causes and solutions

Checking the Clutch Release Pedal Travel
The clutch pedal travel is checked to assess the technical condition of the clutch and to determine the reasons for its abnormal operation (the clutch "leads", "slips",...

Removal and installation the clutch
The main faults that require removal and disassembly of the clutch to eliminate: increased (compared to usual) noise when engaging the clutch; jerks when operating the...

Replacing the clutch release drive slave cylinder with bearing
A sign that the clutch release bearing needs to be replaced is increased noise when pressing the clutch pedal, and the clutch release drive slave cylinder is leaking...

Replacing the clutch release master cylinder
You will need: flat- and Phillips-head screwdrivers, pliers, a 10 mm wrench, and a 13 mm socket wrench. 1. Remove the cap from the brake master cylinder reservoir… 2....

Replacing the clutch release hydraulic lines
To replace the clutch hydraulic supply line do the following. 1. Disconnect the supply line from the brake master cylinder nipple (see " Replacing the clutch release...

Removal and installation the clutch pedal
You will need two 13 mm keys. 1. Remove the clutch master cylinder (see " Replacing the clutch release master cylinder "). 2. Loosen the pedal mounting bolt nut, holding...

Bleeding the clutch release hydraulic drive
If the clutch does not disengage completely when the pedal is pressed all the way ("leads"), which is accompanied by a characteristic grinding of gears when reverse gear...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Fusion
Scorpio 1
Scorpio 2
Sierra