Car clutch repair Ford Transit 2

Clutch — technical data
Type Conventional Clutch - Single-plate dry clutch with diaphragm spring, cable actuation and automatic adjustment (cars manufactured after 1996 have manual adjustment)....

Clutch — general information
All types of manual transmissions are equipped with a single-disc dry clutch, controlled by a cable. The device consists of a steel casing secured with bolts to the back...

Clutch cable — removal and installation
Removal 1. Make sure the parking brake is applied and the rear wheels are locked. Raise the front of the vehicle and support it with a jack at a comfortable working...

Clutch pedal — removal and installation
Removal 1. Disconnect the end of the cable secured to the toothed segment of the clutch pedal. 2. Release the clutch pedal axle clamp and remove the pedal from the axle....

Clutch — removal, inspection and installation
Caution: Dust resulting from wear of friction linings (and deposited on the clutch components), contains asbestos compounds that are hazardous to health. Do not blow out...

Clutch release mechanism — removal, inspection and installation
Removal 1. When the engine and transmission are separated from each other, allowing access to the clutch, special attention must be paid to the clutch release mechanism...

Clutch cable — adjustment
1. On vehicles manufactured after January 1996, the automatic clutch cable adjuster is manually adjusted. A manual tensioner cable can also be installed on older models...

Automatic clutch system components — removal and installation
The automatic control system is more complex, and a malfunction or improper adjustment of any of the components can make the vehicle unsafe to operate. Therefore, if any...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian