Car clutch repair Ford Mondeo 4

Clutch
Fig. 6.1. Clutch: 1 – flywheel; 2 – driven disk; 3 – clutch housing with pressure plate; 4 – diaphragm spring. Ford Mondeo vehicles equipped with a manual transmission...

Checking the Clutch Release Pedal Travel
You will need a ruler. The clutch pedal travel is checked to assess the technical condition of the clutch and to determine the reasons for its abnormal operation (the...

Removing and installing the clutch
The main faults that require removal and disassembly of the clutch to eliminate are: – increased (compared to usual) noise when engaging the clutch; - jerks when the...

Replacing the clutch release drive slave cylinder with the clutch release bearing
A sign that the clutch release bearing needs to be replaced is increased noise when pressing the clutch pedal, and the clutch release drive slave cylinder is leaking...

Replacing the clutch release master cylinder
You will need: all the tools needed to remove the clutch pedal ( see Removing and installing the clutch pedal ), as well as a flat-blade screwdriver. 1. Remove the cap...

Replacing the clutch release hydraulic line
You will need a flat-blade screwdriver. To replace the clutch release line tube, follow these steps:. 1. Press the tube tip retainer with a screwdriver… 2….and...

Removing and installing the clutch pedal
The clutch pedal is removed for replacement if there is a squeak, sticking or increased play, as well as if the return spring is damaged. You will need: a 13 mm socket...

Bleeding the clutch release hydraulic drive
If the clutch does not disengage completely when the pedal is pressed all the way ("leads"), which is accompanied by a characteristic grinding of gears when reverse gear...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Mondeo 4
Mondeo 3
Mondeo 2
Mondeo 1 and 2
Mondeo 1