Vehicle technical data Ford Mondeo 1 and 2

Basic dimensions and weights
Dimensions until 1997 since 1997 Full length: Models Sedan, Hatchback 4481 mm 4556 mm Model Wagon 4631 mm 4871 mm Full Width (including mirrors) 1925 mm 1925 mm Full...

Vehicle identification
In the production of cars, small changes in their design constantly occur, information about which is not always published. Catalogs and spare parts lists are based on...

General Repair Tips
When servicing, restoring, or repairing your vehicle's systems, follow these guidelines to help you complete the job successfully and professionally. Mating surfaces and...

Jacking up the car
When jacking up the vehicle for repairs or maintenance, install it as follows. Raise the front if necessary. Place the jack under the pallet with a piece of wood between...

Tools and fixtures
The choice of good tools is the key to good service and successful car repairs. For car owners who do not have such tools, their purchase will cause a significant...

Checking the technical condition
Below are recommendations for checking the technical condition of the car in terms of its readiness for the annual technical inspection. Obviously, you will not be able...

Checks performed from the driver's seat
Hand brake Check the operation of the hand brake. Excessive displacement (too many clicks) indicates a faulty brake or incorrect cable adjustment. Make sure the...

Checks performed with the vehicle on the ground
Vehicle identification Vehicle license plates must be in good condition and securely fastened. The inscriptions on them must be clear. The inscriptions on the plate (A)...

Checks on a raised vehicle with spinning wheels
Jack up the front and rear of the vehicle and place it on secure stands. Position the supports so that they do not touch the suspension units. Make sure the wheels are...

Vehicle Exhaust System Check
Gasoline engines Start and warm up the engine to normal operating temperature and check that the engine is running normally (the ignition system is in good condition,...