Car rear suspension Ford Mondeo 4
Rear suspension
Fig. 7.2. Location of rear suspension elements on the vehicle: 1 – rear suspension crossmember; 2 - transverse stability stabilizer bar; 3 – rear suspension spring; 4 –...
Fig. 7.2. Location of rear suspension elements on the vehicle: 1 – rear suspension crossmember; 2 - transverse stability stabilizer bar; 3 – rear suspension spring; 4 –...
Checking the technical condition of the rear suspension parts on the car
Fig. 7.2. Location of rear suspension elements on the vehicle: 1 – rear suspension crossmember; 2 - transverse stability stabilizer bar; 3 – rear suspension spring; 4 –...
Fig. 7.2. Location of rear suspension elements on the vehicle: 1 – rear suspension crossmember; 2 - transverse stability stabilizer bar; 3 – rear suspension spring; 4 –...
Replacing the rear shock absorber
You will need: socket heads "10", "18", open-end wrench "13", pliers. WARNING: Replace shock absorbers (left and right) in pairs. 1. Apply the parking brake and place...
You will need: socket heads "10", "18", open-end wrench "13", pliers. WARNING: Replace shock absorbers (left and right) in pairs. 1. Apply the parking brake and place...
Replacing the rear suspension spring
Replace the spring if it is mechanically damaged or has significant subsidence. Signs of subsidence: – deterioration in ride smoothness, frequent suspension...
Replace the spring if it is mechanically damaged or has significant subsidence. Signs of subsidence: – deterioration in ride smoothness, frequent suspension...
Replacing the upper arm of the rear suspension
You will need: a 15 mm socket head, a spacer (see item 2). 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Install a 226mm high and...
You will need: a 15 mm socket head, a spacer (see item 2). 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Install a 226mm high and...
Replacing the front lower control arm of the rear suspension
You will need: a 15 mm socket head, a spacer (see item 2). 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Install a 226mm high and...
You will need: a 15 mm socket head, a spacer (see item 2). 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Install a 226mm high and...
Replacing the rear lower control arm of the rear suspension
You will need: keys "15", "18", "19", spacer (see item 3). 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Remove the stabilizer...
You will need: keys "15", "18", "19", spacer (see item 3). 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Remove the stabilizer...
Replacing the rear suspension trailing arm
You will need: a 7 mm wrench, a 15 mm socket head, and a TORX T30 wrench. 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Remove...
You will need: a 7 mm wrench, a 15 mm socket head, and a TORX T30 wrench. 1. Remove the rear suspension spring ( see Replacing the rear suspension spring ). 2. Remove...
Replacing the rear suspension stabilizer bar components
You will need: 13 and 15 mm wrenches, and a 5 mm Allen key. 1. Loosen the nuts securing the strut to the anti-roll bar… 2….and to the longitudinal arm bracket, holding...
You will need: 13 and 15 mm wrenches, and a 5 mm Allen key. 1. Loosen the nuts securing the strut to the anti-roll bar… 2….and to the longitudinal arm bracket, holding...
Replacing the rear wheel hub
You will need a TORX T50 key. 1. Loosen the tightening of the nuts of the corresponding wheel. 2. Engage first gear and place chocks under the front wheels. Raise and...
You will need a TORX T50 key. 1. Loosen the tightening of the nuts of the corresponding wheel. 2. Engage first gear and place chocks under the front wheels. Raise and...
Removing and installing the rear suspension crossmember
It is easier to remove the rear suspension crossmember on a lift. If it is not possible to install the car on a lift, lift the rear of the car. USEFUL TIP: When removing...
It is easier to remove the rear suspension crossmember on a lift. If it is not possible to install the car on a lift, lift the rear of the car. USEFUL TIP: When removing...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See other similar sections for Ford cars:
• Chassis: Rear suspension Ford Focus 1 (1998-2004)
• Chassis: Rear suspension Ford Escort 3 (1980-1985)
• Suspension and chassis: Rear suspension Ford Fiesta 2 (1983-1989)
• Chassis: Rear suspension Ford Focus 1 (1998-2004)
• Chassis: Rear suspension Ford Escort 3 (1980-1985)
• Suspension and chassis: Rear suspension Ford Fiesta 2 (1983-1989)
Mondeo 4
Mondeo 3
Mondeo 2
Mondeo 1 and 2
Mondeo 1
- General information
- User guide
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Exhaust system
- Supply system
- Fuel vapor recovery
- Transmission
- Clutch
- Car gearbox
- Wheel drives
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors, locks and windows
- Heating and ventilation
- Security systems
- Electrical equipment
- Electrical appliances
- Headlights and lighting
- Battery and alternator
Mondeo 3
- General information
- Introduction to the guide
- Workplace equipment
- Car care
- Help with malfunctions
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Fuel injection system
- Ignition system
- Fuel system
- Transmission
- Chassis
- Chassis
- Brake system
- Body
- Interior
- Exterior
- Electrical equipment
- Light and appliances
- Battery and alternator
- Schematic diagrams
Mondeo 2
- General information
- User guide
- Maintenance and care
- Wheels and rims
- Power unit
- V16 engine
- Duratec VE
- Lubrication system
- Cooling system
- Power systems
- Ignition system
- Exhaust system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Wheel drives
- Chassis
- Front suspension
- Rear suspension (sedan)
- Rear suspension
- Steering
- Brake system
- Brake service
- Electrical equipment
- Battery and alternator
- Light and appliances
Mondeo 1 and 2
- General information
- User guide
- Vehicle data
- Repair on the road
- Weekly checks
- Periodic maintenance
- Troubleshooting
- Engine
- 4 cylinder engines
- 6 cylinder engines
- Removal and repair
- Cooling system
- Fuel/exhaust systems
- Emission management
- Starting and charging systems
- Ignition system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Brake system
- Suspension
- Steering
- Body
- Exterior
- Interior
- Electrical equipment
Mondeo 1
- General information
- Car care
- Maintenance
- Troubleshooting
- Power unit
- Engine repair
- Cooling and lubrication system
- Ignition system
- Fuel/exhaust systems
- Fuel injection (gasoline)
- Fuel injection (diesel)
- Transmission
- Clutch and drive shafts
- Car gearbox
- Chassis
- Suspension
- Steering
- Brake system
- Wheels and tires
- Body
- Exterior
- Interior
- Doors, locks and windows
- Heating system
- Electrical equipment
- Equipment and devices
- Power devices
- Lighting and signaling
- Windshield wipers and washers
- Electrical circuits