Description of the car body Hour last «European» Ford with rear-wheel drive struck in 1993. The Sierra successor has been branded Mondeo ever since, from model year 2001 in its second generation:...
Dismantling and installation of the door Axial adjustment with spacer: Wedge wedges 1 - Mounting screws, 2 - Threaded plate, 3 - Lock body, 4 - Spacer washer. Since these works with all doors are almost...
Door adjustment Place your Mondeo on as level a surface as possible and open the skewed door. With open «gate» it is more convenient to work with door hinge fixing screws. PROCEDURE...
Dismantling and installation of the fairing PROCEDURE Mark the position of the wiper blades on the glass with a felt-tip pen and remove both wiper arms as described above. Remove the grille cover and unscrew the...
Dismantling and installation of the hood Both halves of the hinge are screwed to the engine hood and wheel housing. The new Mondeo has prestressed hinges which have a certain amount of preload when closed....
Engine Hood Adjustment PROCEDURE Work with the pre-mounted hood strictly point by point in the order below - otherwise the prestressed hinges may «have a dance». Align the hood evenly between...
Dismantling and installation of the bumper cover (front) PROCEDURE Raise and secure the front of the car and remove the grille (attachment points are indicated by arrows). Removing the grille. If your Mondeo has a headlight...
Dismantling and installation of wings The order of these works on both sides is almost the same. The description for the left side is given as an example. PROCEDURE Dismantle, as described above, the front...
Dismantling and installation of the bumper cover (rear) These works in all models are approximately the same. Below is the procedure for the sedan model. PROCEDURE Unscrew both upper fixing screws (arrows) lids and.. Remove...
Dismantling and installation of the trunk lid This work in all models is approximately the same. Below is the procedure for the sedan model. PROCEDURE Park your Mondeo on a level surface, disconnect the battery and...
Trunk lid adjustment PROCEDURE Park your vehicle on a level surface and open the trunk lid. Loosen all the stub screws on the rear end plate (indicated by arrows). Loosen all stud screws...
Dismantling and installation of the rear door lock Since the installation procedure in all models is approximately identical, we will give here a description of this process for a model with a sedan body PROCEDURE...