Interior (internal body elements) Ford Mondeo 1

Removal and installation of a covering of a roof of salon
Withdrawal Disconnect the ground wire (-) from the battery. Attention! As a result, data in electronic storage devices, such as an engine fault memory or a radio code,...

Removal and installation of an internal covering
A-pillar The A-pillar is the A-pillar on which the front door is hung. Before removing, pull off the door seal in the trim area. Disconnect the casing from the upper and...

Removal and installation of a forward seat
Withdrawal Remove the T50 bolts securing the seat belt to the seat and pull the belt through the trim. Move the seat to the most forward position. Turn out bolts of...

Removal and installation of a back seat
Withdrawal Pull up the right and left edges of the seat and thus disengage them from the plastic holders. Check to see if the seat has disengaged from the three hooks on...

Removal and installation of a back of a back seat
Withdrawal Unlock the rear seatback and tilt it forward. If equipped, remove the rear backrest trim. Remove the four T40 hinge screws (on each back). Remove a back of a...

Removal and installation of the average console
Withdrawal Disconnect the ground wire (-) from the battery. Attention! As a result, data in electronic storage devices, such as an engine fault memory or a radio code,...

Removal and installation of an internal rear-view mirror
Withdrawal Use a thin nylon cord to cut the adhesive joint between the mirror leg and the black surface of the windshield. Remove the mirror. Installation Attention! Do...