Replacing parts of the rear suspension anti-roll bar

You will need: keys "for 13", "for 15", a hex key "for 5".



1. Turn away nuts of fastening of a rack to a bar of the stabilizer of cross-section stability..



2.... and to the trailing arm bracket, keeping the rack from turning.



3. Remove a rack of the stabilizer of cross stability of a back suspension bracket. Remove the second stand in the same way.



4. Turn out on two bolts of fastening of brackets of the stabilizer and remove a bar of the stabilizer in gathering with pillows and brackets of fastening.



5. Pry with a screwdriver..



6.... and remove the stabilizer bar mounting bracket.



7. Unclench the rubber pad..



8.... and remove it from the stabilizer bar.



9. Establish new pillows and press on brackets of fastening of the stabilizer.

10. Install the parts in the reverse order of removal.