Ventilation, heating and cooling systems Ford Transit 2

Ventilation, Heating and Cooling Systems — technical data
General information System Type - Sealed, front-mounted radiator, liquid-friction driven cooling fan and belt-driven water pump. System pressure: 1.0 bar Thermostat...

General information and precautions
General information The cooling system is a sealed type and includes a front-mounted radiator with horizontal tubes, a belt-driven water pump, a temperature-sensitive...

Coolant system hoses — disconnecting and replacing
Note: Please refer to the warnings at the beginning of this Chapter before starting work. 1. If the checks described in Chapter 1 , indicate a defective hose, it should...

Cooling system expansion tank — removal and installation
Caution: Please refer to the warnings provided in Section 1 this Chapter before starting work. Removal 1. Drain the coolant from the cooling system as described in...

Radiator — removal, inspection and installation
Caution: Please refer to the warnings provided in section 1 this Chapter before starting work. If the radiator is removed to fix a leak, note that minor leaks can be...

Cooling fan clutch — removal and installation
Removal 1. A specially shaped 32mm wrench is required to unscrew the coupling from the hub. The wrench should be 5mm thick and curved to engage the edges of the lock...

Coolant Temperature Sensor — removal, inspection, and installation
Examination 1. If the coolant temperature sensor is not working, first check the fuses ( see Chapter 12 ). 2. If the sensor constantly shows "Hot", refer to the section...

Thermostat — removal, checking, and installation
Note: Please refer to the warnings given at the beginning of the chapter before getting started. Removal 1. Disconnect the negative battery cable. 2. Drain the cooling...

Water pump — removal and installation
Note: Please refer to the warnings given in section 1 before starting work. Removal 1. Disconnect the negative battery cable. 2. Drain the coolant and remove the...

Heating and ventilation systems — general information
The heating system consists of an electric fan and a radiator (heating systems), located in the heater body, and pipes connecting the radiator to the engine cooling...

Heating and Ventilation Components — removal and installation
Heater. Models before 1995 Removal 1. Disconnect the negative battery cable. 2. Drain the coolant from the cooling system as described in Chapter 1. 3. Loosen the...

Heating and ventilation system deflectors — removal and installation
Models before 1995 Windshield heating duct 1. Separate the pipe from the deflector and the heater body by pulling it, then remove it. 2. When reinstalling the hose,...

Air Conditioning System — general information and precautions
General information The air conditioning system consists of a condenser, evaporator, compressor, water separator, auxiliary electric cooling fans, and pipes connecting...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian