Contents: Models before 1995 ↳ Models since 1995 ↳
Models before 1995
Windshield heating duct
1. Separate the pipe from the deflector and the heater body by pulling it, then remove it.
2. When reinstalling the hose, first install it on the heater deflector and then attach it to the body.
Front air vents
3. Carefully remove the ventilation grille by prying it out with a screwdriver. Pry at the base to loosen and remove the vent deflector (see Figure 11.3).
Figure 11.3. Carefully pry the front ventilation grille off using a screwdriver.
4. To install the deflector in its original place, align it in the hole, then carefully press it into the hole until you feel the moment when it engages with the adapter.
Models since 1995
Central deflector
5. Disconnect the negative battery cable.
6. Remove the screws and pull the upper and lower housings out of the steering column.
7. Remove the Phillips screws and remove the multifunction switch from the steering column.
8. Disconnect the multi-pin mounting plug and remove the switch.
9. Unscrew the four screws and remove the dashboard.
10. Unscrew the two screws and detach the radio and clock panel from the dashboard. Disconnect the mounting plugs and remove the surrounding components.
11. Separate the ventilation nozzle from the heater body, and remove the radio and clock panel together with the deflector.
12. Release the three retaining clips and separate the deflector from the radio and clock panel.
13. Installation is carried out in the reverse order of removal.
Side deflector (driver's side)
14. Carry out the procedures described above in paragraphs 5 through 9
15. Remove the two screws securing the heating and ventilation control panel and remove the panel
16. Reinstallation is carried out in the reverse order of removal.
[The original source of this article can be found at: fordbook.ru]