Contents: Removal ↳ Installation ↳
Caution: Please refer to the warnings provided in Section 1 this Chapter before starting work.
Removal
1. Drain the coolant from the cooling system as described in Chapter 1.
2. Loosen the hose clamps and separate the hoses in the expansion tank, marking their correct locations for reinstallation.
3. Unscrew the fixing screws and remove the tank from the engine compartment (see figure 3.3).
Figure 3.3. Unscrew the expansion tank screws(marked with arrows), and take it off.
Installation
4. Installation is carried out in the reverse order of removal. When finished, fill the cooling system with coolant as described in Chapter 1.