Clutch cable — adjustment (Transit 2)

1. On vehicles manufactured after January 1996, the automatic clutch cable adjuster is manually adjusted. A manual tensioner cable can also be installed on older models if you are not satisfied with the operation of the automatic tensioner.

2. Measure the pedal travel to adjust the clutch (the distance between the released pedal position and the fully depressed position).

3. Measure the distance between the bent right-angle stop bracket on the pedal and the stop located directly behind it on the pedal mounting bracket. Compare the measured distance with the required one.

4. To adjust the pedal stroke, turn the adjusting nut in the desired direction (see figure 6.4.).