Car steering Ford Escort 3
Features of the device
Steering with rack and pinion steering mechanism (Fig. 5.1). Fig. 5.1. Steering parts. 1 - steering gear assembly; 2 and 3 - steering gear supports; 4 and 5 - steering...
Steering with rack and pinion steering mechanism (Fig. 5.1). Fig. 5.1. Steering parts. 1 - steering gear assembly; 2 and 3 - steering gear supports; 4 and 5 - steering...
Removing the steering gear
Set the wheels to the straight-ahead position. Place the front of the car on stands. Loosen and remove the tightening bolt of the elastic coupling connecting the shaft...
Set the wheels to the straight-ahead position. Place the front of the car on stands. Loosen and remove the tightening bolt of the elastic coupling connecting the shaft...
Installing the steering gear
Install the locknuts and steering rod ends on the rack, screwing them in exactly the number of turns recorded during removal. Install rubber supports on the steering...
There are 1 a comment
Install the locknuts and steering rod ends on the rack, screwing them in exactly the number of turns recorded during removal. Install rubber supports on the steering...
There are 1 a comment
Disassembly of the steering mechanism of cars produced before May 1983
Remove the protective covers and drain the grease from the mechanism housing. Clamp the steering mechanism in a vice with soft metal pads. Use a G34.9 mm drill to drill...
Remove the protective covers and drain the grease from the mechanism housing. Clamp the steering mechanism in a vice with soft metal pads. Use a G34.9 mm drill to drill...
Assembly of steering gear for cars manufactured before May 1983
Clean and carefully check the technical condition of all parts, especially the rack guide bushing (Fig. 5.3). Install, if necessary, a new thrust bushing into the...
Clean and carefully check the technical condition of all parts, especially the rack guide bushing (Fig. 5.3). Install, if necessary, a new thrust bushing into the...
Disassembling the steering gear on cars produced since May 1983
Clamp the steering gear in a vice so as not to damage the drive pinion bearing. Remove the clamps of the protective covers and covers from the steering rods. Move the...
Clamp the steering gear in a vice so as not to damage the drive pinion bearing. Remove the clamps of the protective covers and covers from the steering rods. Move the...
Assembly of steering gear for cars produced since May 1983
Clean and thoroughly check the technical condition of all parts. Install the guide bushing in the steering gear housing. Apply a thin layer of semi-liquid grease used...
Clean and thoroughly check the technical condition of all parts. Install the guide bushing in the steering gear housing. Apply a thin layer of semi-liquid grease used...
Checking the drive gear rotation torque
Clamp the steering gear in a vice, the drive pinion cover should be facing upwards. Tighten the cover mounting bolts to a torque of 0.6–0.9 kgf·m. Measure the pinion...
Clamp the steering gear in a vice, the drive pinion cover should be facing upwards. Tighten the cover mounting bolts to a torque of 0.6–0.9 kgf·m. Measure the pinion...
Removing and installing the steering shaft
Disassembly Disconnect the wires from the battery terminals. Loosen the nut, remove the bolt and remove the clamp connecting the steering shaft to the drive pinion....
Disassembly Disconnect the wires from the battery terminals. Loosen the nut, remove the bolt and remove the clamp connecting the steering shaft to the drive pinion....
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See other similar sections for Ford cars:
• Chassis: Steering Ford Focus 2 (2004-2010)
• Chassis: Steering Ford Mondeo 2 (1997-2000)
• Chassis: Steering Ford Fiesta 4 (1996-1999)
• Chassis: Steering Ford Taurus 1 and 2 (1986-1994)
• Chassis: Steering Ford Scorpio 1 (1985-1994)
• Chassis: Steering system Ford Transit 2 (1986-2000, diesel)
• Chassis: Steering Ford Focus 2 (2004-2010)
• Chassis: Steering Ford Mondeo 2 (1997-2000)
• Chassis: Steering Ford Fiesta 4 (1996-1999)
• Chassis: Steering Ford Taurus 1 and 2 (1986-1994)
• Chassis: Steering Ford Scorpio 1 (1985-1994)
• Chassis: Steering system Ford Transit 2 (1986-2000, diesel)
Escort 5
Escort 4
Escort 3
- General information
- User manual
- Maintenance
- Engine
- HCS and Endura-E engines
- CVH and PTE engines
- Zetec and Zetec-E engines
- Gasoline engines
- Diesel engines
- Diesel engines (since 1992)
- Cooling and heating
- Carburetors
- CFI fuel injection
- EFI fuel injection
- SEFI fuel injection
- Exhaust system
- Charging and starting system
- Ignition system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Brake system
- Car suspension
- Steering
- Body
- Electrical equipment
- Light and appliances
- Schematic diagrams
Escort 4
- General information
- User manual
- Maintenance
- Gasoline engines
- OHV engine repair
- CVH engine repair
- Fuel system
- Weber 2V carburetor
- KE-Jetronic injection system
- CFI injection system
- Ignition system
- Diesel engines
- Engine repair
- Fuel system
- High pressure pump
- Cooling and lubrication system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Suspension and wheels
- Steering
- Brake system
- Body
- Body elements
- Doors, locks and windows
- Electrical equipment
- Equipment and devices
- Lighting system
- Electrical circuits
Escort 3
- General information
- Maintenance
- Characteristics
- Engine
- Disassembly and assembly
- Cooling system
- Lubrication system
- Supply system
- Fuel injection «K-Jetronic»
- Transmission
- Clutch
- Mechanical gearbox
- Hydromechanical box
- Drive shafts
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Electrical equipment
- Starting and charging system
- Ignition system
- Ignition «Escort RS 1600»
- Light and appliances
- Schematic diagrams
