Car automatic transmission Ford Escort 4

Technical characteristics of the automatic transmission FORD ATX
Ford ATX automatic transmission (Automatic – Transaxle) It has three forward gears and one reverse gear. Depending on the position of the gearshift lever, the vehicle...

Removal and installation of transmission FORD ATX
Ford ATX automatic transmission 1 - control case; 2 - torque converter; 3 - planetary transmission of the torque converter; 4 - gear switch; 5 - drive shaft; 6 -...

Gearbox controls FORD ATX
Gear selector mechanism 1 - coupling bolt; 2 - washer; 3 - plastic gasket; 4 - spring; 5 - lever; 6 - movable base of the lever; 7 - self-locking nut Control lever and...

Checking the parking brake box FORD ATX
The check is made on a warm engine and gearbox. Each check should last no more than 5 seconds, otherwise the units may fail due to overheating. The check is made if the...

Checking the oil level in the FORD ATX box
To ensure normal and durable operation of the gearbox, it is necessary to maintain an optimal oil level. Checking the oil level should be done every 20,000 km of the...

Towing a car with an automatic transmission
Car towing When the vehicle is being towed, the ignition must be on and the gear selector must be in the "N". The towing distance should not exceed 20 kilometers, and...

The main malfunctions of the FORD ATX gearbox
Delayed operation during manual shifting occurs when the shift rod is damaged or incorrectly adjusted, the return rods are not adjusted correctly, and the oil is...

Technical characteristics of the automatic transmission FORD CTX
CTX automatic transmission (Continously Variable Transaxle) with a smoothly changing gear ratio over the entire speed range. The transmission of torque from the engine...

Removing and installing transmission FORD CTX
CTX automatic transmission 1 - drive shaft; 2 - planetary gear; 3 - reverse clutch; 4 - forward gear; 5 - primary pair of bevel gears; 6 - secondary pair of bevel gears;...

FORD CTX Gearbox Shift Rod
Withdrawal 1. Set the gear selector to position "R". 2. Raise the front of the car and secure it on stands. 3. Unscrew the lever handle, remove the decorative cover from...