Automatic transmission CTX
1 – drive shaft; 2 – planetary gear; 3 – reverse clutch; 4 – forward gear; 5 – primary pair of bevel gears; 6 – secondary pair of bevel gears; 7 - step-down set; 8 – steel strip; 9 – leading gear; 10 – speedometer drive gear; 11 – slider for manual switching; 12 – driven gear; 13 – hydraulic control body; 14 – oil pan
The CTX gearbox is removed and installed in the same way as the ATX gearbox (see subsection 8.2.1.2) except for the following differences.
1. Unscrew the bolt securing the eccentric control cable housing, disconnect the cable from the rod and remove it.
2. Disconnect the gearbox control cable by unscrewing the two nuts on the cable mount and removing the fork head from the shift shaft.
3. Unscrew the two oil pipes (indicated by arrows) connecting the box and the radiator.