Car front suspension Ford Escort 3

Features of the device
The front suspension is of the swinging candle type, independent, telescopic, with hydraulic shock absorber struts 9 and 10 (Fig. 4.1), connected to the steering...

Features of the front suspension of the «Escort RS 1600 i»
The struts and anti-roll bar are attached to the aluminum crossmember. The reinforced anti-roll bar with a diameter of 25.5 mm is attached to the crossmember and the...

Checking and adjusting the front wheel alignment angles
Before adjusting the wheel alignment angles, check the air pressure in the tires, free play in the wheel hub bearings and set the wheels parallel to the longitudinal...

Replacing hub bearings
Loosen the wheel mounting bolts and place the front of the car on stands. Remove the wheel and tighten the wheel mounting bolts so that when loosening the hub nut, the...

Removing and installing the front suspension strut
Raise the front of the vehicle on stands and remove the wheel. Lock the wheel drive shaft. Loosen the bolt securing the strut to the steering knuckle. Insert tool 14.026...

Disassembly and assembly of suspension strut
After removing the suspension strut, compress the spring with a special device until the upper strut mount is released. Holding the shock absorber piston rod with a 6 mm...

Removing and installing the lower suspension arm
Raise the front of the car on stands. Loosen the nut and remove the bolt securing the suspension arm to the car body. Loosen the bolts securing the anti-roll bar. Then...

Removing and installing the anti-roll bar
Raise the front of the vehicle on stands. Loosen the bolts securing the stabilizer bar to the body, then loosen the nuts 1 ( fig. 4.8 ). remove washers 2, split bushings...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Escort 5
Escort 4
Escort 3