Car steering Ford Fiesta 2

Description of the gear steering mechanism
The toothed steering mechanism is located at the front of the chassis below. It is operated manually using the steering wheel. The rotational movement of the steering...

Removing and installing the steering gear
Turn the steering wheel so that the front wheels are in the straight-ahead position. Unscrew the clamping bolt on the shaft of the toothed wheel moving the toothed rack....

Replacing the rubber boots of the steering gear
Rubber boots can be replaced without removing the steering gear from the vehicle. Disconnect the right or left side of the tie rod from the steering knuckle arm. Unscrew...

Removing and installing the steering column
Disconnect the vehicle ground cable from the battery clamp. Remove the manual suction control cable handle. Remove the upper and lower steering shaft covers. Remove the...

Removing and installing the steering shaft
Remove the steering column together with the steering shaft. Secure the column with the shaft in a vice with soft jaws. Remove the lower guide bushing from the column...

Wheel installation
Knowing the data regarding the installation of wheels and measuring the actual angles are of practical importance. Comparing these values allows you to assess...