Replacing the front door power window motor

You will need a TORX T30 key.

1. Disconnect the wire from the terminal «minus» battery.

2. Remove the door upholstery (see «Removal and installation of an upholstery of a forward door»).



3. Wring out a clamp of a block of a plait of wires of the motor-reducer of a window regulator and disconnect a block from conclusions of a motor-reducer.



4. Turn out three bolts of fastening …



5.... and remove the power window motor.

6. Install the gearmotor and all previously removed parts in reverse order.

Note. Apply grease to the gear motor gear before installation.