Removal and installation of a combination of devices

You will need: TORX T25 wrench, flat and Phillips screwdrivers.

1. Disconnect the wire from the terminal «minus» battery.

2. Remove the airbag slip ring (see «Removal and installation of a steering column»).



3. Turn out on both sides screws of fastening..



4.... and remove the decorative frame of the steering column.



5. Turn out two screws of fastening..



6.... press the instrument cluster lock..



7.... and remove the instrument cluster from the instrument panel.



8. Press the latch..



9.... fold back the pad clamp..



10.... disconnect the wiring harness block and remove the instrument cluster.

11. Install all previously removed parts in reverse order.