Removal and installation the audio system remote control (Fusion)

            0

Depending on the configuration, Ford Fusion vehicles can be equipped with different types of remote controls.

You will need a flat-blade screwdriver.

1. Disconnect the wire from the negative terminal of the battery.

1. Disconnect the wire from the negative terminal of the battery.


2. Remove the upper part of the steering column cover (see "Removal and installation steering column covers").

2. Remove the upper part of the steering column cover (see «Removal and installation steering…


3. Using a screwdriver, pry up the retainer (for clarity, the steering wheel has been removed)…

3. Using a screwdriver, pry up the retainer (for clarity, the steering wheel has been removed)…


3. Using a screwdriver, pry up the retainer (for clarity, the steering wheel has been removed)…


4. …remove the remote control.



5. Disconnect the wiring harness connector from the control panel terminal and remove the control panel.

6. Install the audio system remote control in reverse order.

The article was taken in its entirety from the specified website FORDBOOK






Link to this page in different formats


Visitor comments

No comments yet



Fusion 
Scorpio 1 
Scorpio 2 
Sierra 
We use cookies to ensure the site works smoothly, remembers your settings, and is convenient for you 🍪