1. Remove the decorative cover from the upper belt mount. On the adjustable mount, the cover is removed after opening the cover and unscrewing two screws.
2. Unscrew the nut and remove the upper belt loop. Mark the position of all washers and gaskets.
3. Remove the door seals from the pillar. Release the pillar trim from the clips.
4. Remove the screws securing the seat belt retractor mechanism cover.
5. Remove the trim and the guide, which is secured with two screws.
6. Unscrew the bolt (indicated by the arrow) securing the seat belt retractor mechanism. Mark the position of all washers and gaskets. Remove the seat belt retractor mechanism and guide.
7. To remove the seat belt buckle, you must first remove the corresponding front seat.
8. Unscrew the "Torgh" mounting bolts (indicated by arrows) of the front seat belt buckle and remove the buckle.
9. Installation is carried out in the reverse order of removal.
[The article was taken in its entirety from the specified website: www.FordBook.ru]