Removal and installation of the upper console

1. Remove ground wire from battery.

Attention! At the same time, information in electronic storage devices is erased from memory.

2. Remove the interior light by carefully removing it from the console and unplugging the connector.

3. Remove the sunroof opening handle or sunroof switches.



4. Unscrew the two screws on the front of the console (one of the screws is indicated by an arrow).



5. Remove the front of the console by pulling it down and then sliding it back to release it from the two clips (indicated by arrows).

6. Disconnect watch.

7. Installation is made in sequence, return to removal.