Removal
All cars
1. Place the vehicle on a flat, horizontal surface.
2. Make sure the tires are inflated to the correct pressure and the vehicle is properly loaded.
3. Turn on the low beam headlights.
4. Cycle the headlight range adjuster several times, then set the range adjuster switch to position 0.
5. Set the measuring screen of the headlight aiming equipment to the position corresponding to the correct headlight adjustment.
6. Adjust the headlight so that the boundary line touches the horizontal line.
Cars produced before 10/2001.
7.
NOTE: Some ambient light in low beam mode may lie above the 15 degree line.
NOTE: After vertical adjustment, horizontal adjustment may be required.
Adjust the headlight so that the rising line lies at the intersection of the horizontal line and the 15 degree line (left-hand drive vehicle shown).
Cars produced since 10/2001.
8.
NOTE: Some ambient light in low beam mode may lie above the 15 degree line.
NOTE: After vertical adjustment, horizontal adjustment may be required.
Adjust the headlight so that the rising line lies at the intersection of the horizontal line and the 15 degree line (left-hand drive vehicle shown).
For more information, please visit the website FORDBOOK.ru