Special tool
 | Digital Multimeter 105-R0051 or equivalent |
 | Electrical Probe Kit 29-011A |
Inspection and verification
1. Check the customer complaint.
2. Perform a visual inspection for obvious signs of mechanical or electrical damage.
Visual inspection table
Electrical factors:
- Fuse Box(s)
- Lamp(s)
- Electrical connector(s)
- Wiring harness
3. If an obvious cause for the problem you have identified or the customer has described is found, correct it (if possible) before proceeding with further actions.
4. If the problem is not visually obvious, check the symptom and refer to the Symptom Table.
Table of signs of malfunction
|
State |
Possible Causes |
Action |
|
•One or more parking lights, tail lights or license plate lights are not working |
•Fuse(s) •Electrical circuit(s) •Headlight. •Rear light assembly •License plate light. •Light switch •Central Junction Box (CJB) |
• Go to PINPOINT TEST AI |
|
• Side lights, tail lights and license plate lights are always on |
•Electrical circuit(s) •Light switch •Central Junction Box (CJB) •General Electronic Module (GEM) |
• Go to AJ's PINPOINT TEST |