Headlight adjustment — The vehicle is equipped with: headlights

General equipment: Headlight adjustment equipment.

1. Park the vehicle on a level, level surface.

2. Make sure that the tire pressure is correct and that the vehicle is loaded correctly.

3.

NOTE: Turn the ignition key to position II to allow the headlamp leveling system to automatically adjust the headlights.

Turn on low beam headlights.

4. Set the Headlamp Leveling Equipment Measurement Screen to the correct headlight adjustment position.

5.

NOTE: After installing the left headlight assembly, initialize the headlight range adjustment system using WDS.

Adjust the headlight so that the border touches the horizontal line.



6.

NOTE: Some stray light from low beam headlamps may lie above the 15 degree line.

NOTE: After adjusting the headlights in the vertical direction, it may be necessary to adjust in the horizontal direction.

Adjust the headlight so that the upward line lies at the intersection of the horizontal line and the line corresponding to 15 degrees (Shown is a left-hand drive vehicle).