Withdrawal
1. Remove the shift lever cover.
1. Remove the shift lever handle.
2. Release the cover.
- Disconnect the connectors (quantity and configuration depends on the specific equipment).
2. Remove the center console.
- Remove the rubber element and remove the bolts.
3. Remove the gearshift mechanism.
- 1. Disconnect shift and select cables from shift lever.
- 2. Remove the shift and select cables by turning the support rings clockwise.
- 3. Turn out nuts.
Installation
1. Replace the elements in reverse order.
- 1. Secure the shift and select cables by turning the support rings clockwise.
- 2. Install shift and select levers.
- 3. Tighten the nuts.
3. Adjust the shift mechanism. See Section 308-00 for more information.
Visitor comments