Removal and installation decorative trim (Scorpio I) (Scorpio 2)

Removal

Use a screwdriver to press out the decorative trim inserts.



Unscrew the mounting bolts "A". The decorative wing trim is screwed on with two bolts.

Remove the decorative door trims in the places where "B" is glued.

Installation

Apply adhesive tape on both sides to the locations of the ends of the door trims (for example, "B" in Figure F-48103).

Place the decorative strips, align them and secure them with bolts.

Press firmly on the ends of the decorative trims on the doors.

Install inserts on decorative trims.