Replacing the front crankshaft seal ring (Scorpio 1)

1. Remove the timing belt and crankshaft pulley.

2. To remove the front crankshaft sealing ring, drill two small holes in the ring, screw two self-tapping screws into them and use pliers to pull out the sealing ring by the heads of the self-tapping screws.

3. Clean the sealing ring seat.

4. Lubricate the working edges of the new sealing ring with fresh engine oil and install it into the socket with the working edges facing inward.

5. To install the sealing ring into the socket, it is necessary to use the appropriate tubular mandrel.

6. Install the cover, crankshaft pulley and timing belt.

(The text was obtained in its entirety from the specified website: www.FordBook.ru)