Replacing the rear crankshaft seal ring (Scorpio 1)

1. Remove the flywheel.

2. To remove the rear crankshaft sealing ring, drill two small holes in the ring, screw two self-tapping screws into them, and use pliers to pull out the sealing ring by the heads of the self-tapping screws.

3. Clean the sealing ring seat.

4. Lubricate the working edges of the new sealing ring with fresh engine oil and install it into the socket with the working edges facing inward.

5. Install the flywheel.

(The material was copied from an information website: Fordbook.ru)