Replacement and adjustment of windshield washer nozzles (Scorpio 1)

Windshield

1. Open the hood.

2. Remove the supply tube from the injector.

3. Use a small screwdriver to press the injector retainer located at the bottom rear of the injector.

4. Pull the nozzle upwards.

Rear window

5. Insert the blade of a thin screwdriver under the rubber seal (2) of the injector from the nozzle side and, turning the screwdriver, remove the injector (1).



6. The direction of water spray from the nozzle can be adjusted using a 0.8 mm diameter needle.


[This publication was borrowed from the website fordbook]