1. Disconnect the wire from the negative terminal of the battery.
2. Remove the top…
3. …and the lower part of the steering column cover (see "Removal and installation steering column covers").
4. Press the lock…
5. …disconnect the wiring harness connector and remove the contact group.
6. Press the top one (for clarity, these operations are shown on a removed steering column)…
7. …and the lower clamps…
8. …and remove the contact group from the ignition switch.
9. Install the contact group and all previously removed parts in reverse order.
The material was copied from an information website [FORDBOOK.RU]