Checking underbody clearances (Focus 1)

1. Frame dimensions - 3/5-door variants

All dimensions have a tolerance of±3 mm. The detailed illustrations show the left side of the car. All dimensions are measured from the center of the hole using a symmetrically adjusted caliper, with the units removed.

3. Frame dimensions - 3/5-door variants

All dimensions have a tolerance of±3 mm. The detailed illustrations show the left side of the car. All dimensions are measured from the center of the hole using a symmetrically adjusted caliper, with the units removed.

5. Frame dimensions - 4-door version

All dimensions have a tolerance of±3 mm. The detailed illustrations show the left side of the car. All dimensions are measured from the center of the hole using a symmetrically adjusted caliper, with the units removed.

7. Frame dimensions - 4-door version

All dimensions have a tolerance of±3 mm. The detailed illustrations show the left side of the car. All dimensions are measured from the center of the hole using a symmetrically adjusted caliper, with the units removed.

9. Frame dimensions - "universal"

All dimensions have a tolerance of±3 mm. The detailed illustrations show the left side of the car. All dimensions are measured from the center of the hole using a symmetrically adjusted caliper, with the units removed.

11. Frame dimensions - "universal"

All dimensions have a tolerance of±3 mm. The detailed illustrations show the left side of the car. All dimensions are measured from the center of the hole using a symmetrically adjusted caliper, with the units removed.



For details, please visit the website FordBook