Contents: Removal ↳ Installation ↳
| Name | Specification |
| Wing |
Removal
1. General note.
- Remove the following components: headlight, bumper, windshield wiper/washer reservoir and wheel arch trim panel.
2. Wing
- Remove the bolts (7).
- Remove the wing.
Installation
1. Wing
- Adjust the position and tighten the bolts.
- Tolerance for alignment of wing/door position:±1 mm.
- Clearance: 4.0mm±1mm.
- Tighten the bolts.
[This article was borrowed from the website: FordBook]