Front wing insert — removal and installation

1. Raise the front of the vehicle, place it securely on stands, and remove the appropriate front wheel.

2. Remove the plastic caps securing the liner to the body. This procedure is done by moving the pins of the caps with pliers or wire cutters - don't cut the pins, just pull them out (see picture). When the axes of the hole and the pin are no longer aligned, pull the pin out of the wing liner (see picture).





3 Remove the four Phillips head screws from the wing liner.

4. Carefully grasping the edges of the liner, detach it from the wing wall and lower it down.

5. Installation is carried out in the reverse order. To insert the caps, slide them into place and then align the centers of the pins with the holes until they click into place.