Removal and installation of the electric motor of the radiator fan of the engine cooling system

You will need an "8" socket head.

1. Remove the engine cooling fan assembly with shroud (refer to Cooling Radiator Replacement).



2. Press the latch and disconnect the wiring harness block from the fan control unit.



3. Turn out three bolts of fastening of the electric motor to a casing..



4.... and remove the motor assembly with the impeller, passing the wiring harness through the hole in the casing.



5. If necessary, unscrew the fastening nut and remove the impeller.

6. Install the parts in the reverse order of removal.