1. Disconnect the wire from the negative terminal of the battery.
2. Disconnect the wiring harness connector from the fan motor.
3. Press the latches on the left and right sides, lift the electric fan to remove it from the holders..
4. …and remove the electric fan downwards.
5. Unscrew the nut securing the impeller to the electric motor…
6. …and take it off.
7. Unscrew the three mounting nuts…
8. …and remove the casing from the electric motor.
9. Install the parts in the reverse order of removal.
[The original post is on the web portal fordbook.ru]