On models without power windows, first raise the side window as far as it will go. Mark the position of the window handle on the trim with chalk.
Remove the window lift handle. To do this, insert a special tool or a medium screwdriver between the socket and the handle shaft. As a rule, the open side of the safety bracket is turned in the direction of the handle, but it can also be mounted with a 180° turn.
Press the safety clip out of the safety groove.
Remove the window lift handle from the shaft.
On models with power windows, carefully remove the door handle trim using a flat-blade screwdriver.
Remove the mounting screws.
Unscrew screw 1 of the decorative panel of the lock and slide panel 2 to the side.
Disconnect the center connector from the power window and, if equipped, the door speaker.
Loosen the decorative panel of the lock
Remove the door trim screws (arrow).
Remove the door trim mounting screws (arrow)
Remove the trim by rotating it upwards towards the A-pillar and carefully remove it from the door.
If the sealing film is damaged, be sure to cut out a new film and glue it to the door with a fused bead of silicone or repair the damaged film, ensuring its waterproofness
Assemble all structural elements in reverse order.